xTool S1 40W Cutting Guide for 3mm Wood
Recommended cutting and engraving parameters for xTool S1 40W using Crafteker Premium Basswood Sheets (3mm).
| Operation | Speed | Power | Passes |
|---|---|---|---|
| CUT (3mm) | 18 mm/s | 100% | 1 |
| ENGRAVE | 300 mm/s | 20% | 1 |
⚠️ Important: Laser tubes degrade over time. These settings are a starting point. ALWAYS run a small 10x10mm test cut on a corner before running your full project.